OEM Polyurethane Sealant Automobile Windshield Glue Car Windows Black
Factory Information:
With 20 years of experience in glue production, the factory covers an area of 40,000 square meters, equipped with highly
mechanized equipment. The daily output is 30,000 pieces, and there are more than 200 production and R & D personnel. The
source factory supports OEM/ODM. The products are cost-effective. We look forward to your contact.
Main Raw Material
POLYURETHANE
Usage
Construction, Fiber & Garment, Footwear & Leather, Packing, Transportation, Woodworking
Other Names
windshield sealant
Classification
Other Adhesives
Package
aluminum tube and sausage
is a one-component polyurethane adhesive with medium to high viscosity and medium to high strength. It has moderate
viscosity and good thixotropy for easy construction. After curing, it has high bonding strength and good flexible sealing
properties.
Product features
Excellent bonding performance
Excellent extrudability and thixotropy, non-sag.
Application
It is used for permanent elastic bonding sealing of general bonding strength, such as windshield bonding of small vehicles, bus
skin bonding, automobile windshield repair, etc. Applicable substrates include glass, fiberglass, steel, aluminum alloy (including
painted), etc.
Direction for use
The bonding surface should be clean, dry, and free of grease and dust. If there is easy peeling rust on the surface, it should
be removed with a metal brush in advance. If necessary, the surface can be wiped with an organic solvent such .
Depending on the base material and preliminary test results, decide whether to use matching activator and/or primer, and apply
according to its technical instructions.
Application
Cartridge: Open the easy-open cover at the back, pierce the film at the mouth of the tube, screw on the matching glue nozzle,
and load the glue into the hard packaging glue gun;
Sausage: Put the glue into the soft packaging glue gun and cut off the sealing mouth, attach the matching glue nozzle, and
tighten the gun cover;
Barrel packaging: depends on the glue extrusion pump and glue coating equipment;
According to the construction requirements, the glue nozzle is cut into triangles or circles, and glue can be applied in spots
or strips. It must be installed and positioned within the glue surface drying time.
|
Items
|
Properties
|
|
Appearance
| Black, homogeneous paste |
| Density (uncured) |
1.20±0.10g/cm 3
|
| Tack free time②(min) GB/T 13477.5 |
20, approx.
|
| Curing speed(mm/d) HG/T 4363 |
≥3.0mm/24h
|
| Non-volatile contents ( %) GB/T 2793 |
96, approx.
|
| Shore A-hardness GB/T 531.1 |
50
|
| Tensile strength(MPa) GB/T 528 |
≥3.0MPa
|
| Elongation at break(%) GB/T 528 |
≥400%
|
| Tear strength( N/mm) GB/T 529 |
≥7.0N/mm
|
| Tensile-shear strength(MPa)GB/T 7124 |
2.5, approx.
|
| Operating temperature(℃) |
-40~90
|
Factory Pictures
Contact
| WhatsApp | +86 13302391599 |
| Telephone | +86 13302391599 |
| Email | mangrove88@126.com |
FAQ
Q1. When can I receive my products?
A1: Sample order need 1 - 3 days.
Mass production need 7- 10 workdays.
Q2. Can you send me samples for reference?
A2: Yes, we are glad to send you free samples.
Q3. Can you provide OEM service?
A3: Yes, and we can custom the volume and tube package.
Q4: Where is your factory? Can I visit it?
A4:Our factory locate in Guangdong Province, welcome to visit us anytime!
Q5: What is the payment term that you can provide?
A5: Sample 100% payment.
30% TT prepayment and 70% balance payment for mass order.
